For residential premises, plasterboard ceiling excellent solution. This material is environmentally friendly, it does not cause allergies, does not contain toxins and does not burn, it is good. Make a multi-level ceiling of drywall do it yourself not enough.
Consider the step-by-step process of installing a multi-level plasterboard ceiling. For work you will need:
Tools: puncher, screwdriver or drill, drywall saw, water level, square or triangle for determining right angles;
Fasteners: dowels and a drill of the appropriate diameter, self-tapping screws;
Materials: ceiling sheet gypsum board, hangers, ceiling profiles, paint stripping cord.
First level installation:
First of all, it is necessary to determine the horizontal to avoid skew. The height of the room is measured in all corners. The corner with the smallest height is selected, in which a horizontal line is marked at a distance of five centimeters from the ceiling using a water level. Then, using a paint cord, we beat off the lines at the intended level. Next, through the profile, we drill holes for dowels in the wall and fasten the profile to the wall;
The next step is to mark parallel straight lines on the ceiling at a distance of sixty centimeters from each other, then hangers are screwed along them;
Next, a profile is attached to the suspensions, and the suspensions are bent;
In places where the joint of drywall sheets is planned, longitudinal profiles are attached, used as stiffeners;
Now you can lay wires for future wiring;
Using self-tapping screws, drywall sheets are attached to horizontal and longitudinal profiles;
Wires for spotlights are brought out.
Second level installation
According to a pre-prepared sketch of the second level of the plasterboard ceiling, we mark the necessary lines on the ceiling with a pencil;
On the marked lines, we mount the second level of the ceiling in the same way as the first. It is better if the drawing of the second level of the ceiling is drawn up so that the second tier is maximally attached to the ribs of the first. To obtain curved lines, the profile is incised and bent according to the pattern;
Drywall is fastened in a similar way; a drywall hacksaw is used to obtain the required shape.
After the end of the installation, the ceiling is plastered and color. You can choose the ceiling design at your request and taste. The result will be delighted with its beauty and originality.